What is Aseptic Plus?

So, What is Aseptic plus? Let’s find out!

Do you need to disinfect your facility but you are unsure which solution would be the most appropriate for your property? During your research, you may have discovered a few different products that all sound similar. If you are considering purchasing a disinfectant, you need to be sure to compare all of your options to the many benefits of Aseptic +Plus

Recommended for Food Contact Surfaces

Aseptic Plus is a hospital-grade disinfectant that can be used to sanitize food contact surfaces. It kills numerous bacteria and viruses including those causing MRSA, Staph, E. coli, and Hepatitis A, B & C.  Food contact surfaces would be any surfaces that touch food such as dishes, cooking utensils, and countertops. No rinsing is required after applying to food contact surfaces, and this product will not alter the taste of food on sanitized items or surfaces. Additionally, it is a non-toxic solution. 


Killer kill rates

Aseptic Plus has a kill rate of 99.999% for harmful bacteria on food contact surfaces, and it has a 99.9% kill rate for carpet sanitization and soft surfaces. Bacteria are often referred to as germs. Bacteria are microscopic organisms that are everywhere around us. Some are good for you and others can be very harmful. A surface contaminated with SARS-CoV-2, the virus that causes Covid-19, could have millions of harmful bacteria in just one square centimeter. This is where strength of your disinfectant plays an important role. For example, sanitizing a food contact surface that has 1,000,000 harmful bacteria, using a disinfectant that has a 99.9% kill rate will still leave 1000 harmful bacteria remaining on the surface. With the Aseptic +Plus’s kill rate of 99.999% for food contact surfaces, there would only be 10 bacteria remaining.

No chemical residue

Aseptic Plus is a 100% biodegradable, non-corrosive surfactant. If you want to sanitize your property without harming the environment around you, this eco-friendly product will fill that bill. It will disintegrate while getting assimilated back into the natural environment. 

Mitigation for Mold & Mildew

Aseptic Plus works efficiently as a mold & mildew remover. Also, it can be used as a preventive agent against mold & mildew on both hard surfaces and fabrics. The antimicrobial control of this product disinfects and eliminates odors and ensures air quality in HVAC systems. University and government sponsored studies have concluded that it kills and prevents spores with up to a 7-month residual. It is safe on a wide range of surfaces from carpet to countertops. 

Fragrance Free

Aseptic Plus is fragrance free; so, there is no need to be concerned about any type of chemical smell lingering in the treated area. Unlike products that are labeled unscented, this product has no chemical that will cover the smell of other ingredients. When switching to a fragrance-free less toxic product, many notice an improvement in overall health and well-being. Protecting your family, staff, and customer’s health through the use of products with no harmful side effects is very important.

Odor eliminator

Aseptic Plus acts as a deodorizer and a heavy-duty odor eliminator. It is activated by chemically combining with oxygen. Through this process, the odor is eradicated rather than simply being masked. It can eliminate odors caused by smoke, trash, septic systems, cooking, pets, and more. It Is highly effective at neutralizing urine and fecal odors.

Allergen eliminator

Aseptic Plus is proven effective on pet dander as well as dust mites and cockroach allergens. It can be used directly on pet bedding and sleeping areas.


Aseptic Plus may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization of high-level disinfection.  

Application of Product

Aseptic Plus can be used in spray, sponge, mop, immersion, and in electrostatic sprayers, ULV sprayers, fogging, and misting machines. Both hand-held devices and backpack sprayers can be used. Take measures to thoroughly clean the area before applying the disinfect. It is imperative to remove any visible dirt. This product can be diluted for different applications. Use at full strength for deodorizing at 1 quart per 2000 cubic feet following fogger manufacturer’s directions. To sanitize food contact surfaces, mix 1 part Aseptic +Plus to 9 parts of tap water. To sanitize synthetic carpet (nylon, olefin, polypropylene) mix 1 part Aseptic +Plus to 5 parts tap water or use full strength at a 2.5 ounces per square feet. Test for color fastness. This product is not intended for use on wool carpets. For cleaning floors add one cup per gallon of water in a bucket and clean with a sponge, pad, or mop. To disinfect hard non-porous surfaces, apply full strength to pre-cleaned areas wetting thoroughly. Allow the surfaces to remain wet for 5 minutes for virus inactivation or 10 minutes for bacteria disinfection. For immersion replace solution daily or more frequently if it becomes significantly soiled or diluted. Remove or carefully protect all food and food packaging materials prior to treatment. When using spraying or fogging machines, refer to the manufacturer’s directions. When spraying for mold or mildew, hold the sprayer a distance of 12 inches from the target and spray until visibly wet, then allow to air dry. When fogging, it is recommended to vacate the treatment areas during the service and not re-enter until the air is clear – minimum 20 minutes for re-entry. No PPE is required. It is non-irritating to skin so no gloves are required.


EPA Approved

In May of 2020 the U.S. Environmental Protection Agency (EPA) released its N tool, a web-based application that allows consumers to quickly identify disinfectant products that meet the EPA’s criteria for use against SARS-CoV-2, the virus that causes the Coronavirus Disease 2019 (COVID-19). Aseptic +Plus is approved by the EPA for use against SARS-CoV-2. It meets the EPA’s emerging pathogen requirements for viruses showing efficacy against enveloped and non-enveloped viruses. Aseptic +Plus is registered and distributed under EPA Reg. No. 82972-1-91603. It is on the EPA approved Lists B, G & N. The EPA expects all products on List N to kill the coronavirus SARS-CoV-2 (COVID-19) when used according to the label directions. 


Aseptic Plus is a solution that can be used both in residential properties and commercial locations. During these pandemic times this product is a godsend for schools, day-cares, learning centers, gyms, restaurants, cafeterias, food service facilities, hotels, motels, inns, cabins, cruise ships, law offices, public offices, jails, prisons, and correctional facilities. From a hotel room to a hospital room or any other room you want to disinfect, Aseptic Plus is a great solution. And don’t forget…it’s also good for disinfecting trains, planes, automobiles, and public transportation!

If you are looking for an appropriate sanitizing solution for your property, consider Aseptic +Plus. We are confident enough in this product that we encourage you to compare other sanitizers and disinfectants. You are welcome to contact us if you have any additional questions about this product.